Reese Knowledgebase

Power Cycle SUN T5140

View Kristian Reese's profile on LinkedIn


If you like this article, please +1 or Recommend via FB with the provided buttons above:

Article ID: 11
by: Reese K.
Posted: 16 May, 2011
Last updated: 16 May, 2011
Views: 1029

Using the ILOM CLI, type the stop /SYS command to perform a graceful shutdown of the system.

-> stop /SYS 
Are you sure you want to stop /SYS (y/n)? y 
Stopping /SYS 
 
->   Type the start /SYS command.-> start /SYS 
Are you sure you want to start /SYS (y/n)? y 
Starting /SYS 
 
-> 

Reconnect to the system console with the start /SP/console command.

-> start /SP/console 
Are you sure you want to start /SP/console (y/n)? y 
Serial console started.  To stop, type #. 
This article was:   Helpful | Not Helpful
Prev   Next
SUN V20z Escape Sequence     Jumpstart Enterprise Toolkit

RSS