Reese Knowledgebase

How to reset an iDRAC

View Kristian Reese's profile on LinkedIn


If you like this article, please +1 or Recommend via FB with the provided buttons above:

Article ID: 35
by: Reese K.
Posted: 09 May, 2012
Last updated: 09 May, 2012
Views: 1418

Sometimes, the DELL iDRAC doesn't respond properly.  If this is the case, ssh to the iDRAC and reset it with the following command:

/admin1-> racadm racreset soft
RAC reset operation initiated successfully. It may take up to a minute
for the RAC to come back online again.
/admin1-> Connection to 10.195.127.230 closed by remote host.
Connection to 10.195.127.230 closed.

This article was:   Helpful | Not Helpful
Prev   Next
MISC     HP

RSS